KORG Mobile Monitor Amplifier MMA130 - Manual (Page 7)

7
Attaching the stabilizer
You.can.use.the.MMA130.in.an.upright.position.(handle.on.
top)..You.can.also.attach.part.of.a.Korg.ST-WD.percussion.
stand.(sold.separately),.and.place.a.WAVEDRUM.on.the.
MMA130.for.performance..In.this.case,.please.attach.the.
included.stabilizer.to.ensure.stability.during.performance.
*.You’ll.need.a.Philips.head.screwdriver.(no.2).to.attach.
the.stabilizer.
Note:. Never.remove.any.screws.other.than.directed.in.the.fol-
lowing.explanation.
1. . Use.your.screwdriver.to.remove.the.three.stabilizer.at-
tachment.screws.from.the.bottom.of.the.MMA130.
2. .Place. the. included. stabilizer. on. the. bottom. of. the.
MMA130,.and.securely.fasten.it.using.the.three.screws.
that.you.removed.
3. . Place.the.MMA130.so.that.the.stabilizer.is.on.the.bot-
tom,.and.verify.that.the.unit.does.not.wobble.
Using the MMA130 on its side
Place.the.MMA130.so.that.the.surface.with.the.rubber.feet.
is.on.the.bottom.(the.operating.panel.will.be.upward).
Note:. You. must. remove. the. stabilizer. if. you’re. using. the.
MMA130.on.its.side.
Rubber feet