Kids II Bright Starts 6811-NU - Manual (Page 13)


Use the plastic loop under each toy bar to attach toys as
desired.
Use los lazos de plástico que se encuentran debajo de cada
barra de juguetes para sujetar los juguetes según lo desee.
Utilisez les boucles en plastique sous chaque barre de jouets
pour
fi xer les jouets à votre guise.
  The fi gure below shows the completed Activity Zone
assembly.
La fi gura que aparece a continuación muestra el
ensamblaje de la Zona de actividad terminado.
La fi gure suivante représente la zone d’activités une
fois montée.

The Bounce, Bounce Baby ™ Piano Module requires (2) size AA/LR6 (1.5V) batteries (not included). Please use alkaline
batteries for better performance.
CAUTION: Follow the battery guidelines in this section. Otherwise, battery life may be shortened or the
batteries may leak or rupture.
Always keep batteries away from children.
Do not mix old and new batteries.
Do not mix alkaline, standard, or rechargeable batteries.
Only batteries of the same or equivalent type as recommended are to be used.
Install the batteries so that the polarity of each one matches the markings in the battery compartment.
Do not short-circuit the batteries.
Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
Remove exhausted batteries from the battery compartment.
Never attempt to recharge a battery unless it is speci
fi cally marked “rechargeable.”
Rechargeable batteries are to be removed from the toy before being charged.
Rechargeable batteries are only to be charged under adult supervision.
Do not use rechargeable alkaline batteries in a Ni-Cad or Ni-MH battery charger.
Please use the correct disposal method for batteries.
•
•
•
•
•
•
•
•
•
•
•
•
•
The stalk toy is removable from the play surface. At the base of the stalk toy, squeeze the
two tabs together to release the internal latches. Lift the rattle ball stalk toy from its socket.
El juguete del tubo fl exible se desmonta de la superfi cie de juego. En la base del juguete
del tubo fl exible, apriete las dos pestañas juntas para liberar los pasadores internos.
Levante el juguete del tubo fl exible y sonaja de su receptáculo.
Il est possible de détacher le hochet de la surface de jeu. À la base du hochet, appuyez
simultanément sur les deux languettes pour dégager les verrous internes. Soulevez le
hochet à balle de son manchon.
 