Karcher K5800G - Manual (Page 3)

4
Step 5 Slide the throttle control to the
fast position. Move the choke lever to the
“CHOKE” position (only if the engine is cool).
After starting, move the choke to “RUN”.
Step 6 Pull the starter handle. If the
engine fails to start after 3 pulls squeeze the
trigger gun to release pressure, and repeat
step 6.
OPERATING INSTRUCTIONS
Step 1 Connect the high pressure hose
to the unit’s high pressure outlet.
Step 3 Connect garden hose to the cold
water source and turn water on completely.
Step 2 Connect garden hose to unit’s
water inlet.
Step 4 Trigger the gun to eliminate
trapped air, wait for a steady flow of water
to emerge from the spray nozzle.
Required tools: adjustable pliers.
3
ASSEMBLY INSTRUCTIONS
Step 1 Tilt machine backwards slightly
(caution: oil may leak if tilted too far).
Attach the front guard to the frame. Align
holes, insert bolt and tighten with lock nut.
Step 3 Attach the triple jet nozzle to the
spray wand.
Step 4 Attach the spray wand to the
trigger gun.
Step 2 Attach the handle to the frame of
the pressure washer. Align holes, insert bolt,
and tighten with knob.
Step 5 Check oil level. Oil level should be
to the oil filler neck. Be sure the machine is
level when checking the oil level. (Refer to the
engine’s operating manual for seasonal grades.)
Step 6 Fill gas tank with unleaded
gasoline. Do not use leaded gasoline.
Important! Do not run the engine
with a high or low oil level as this can
cause engine damage. If you have fur-
ther questions regarding the engine,
please refer to the engine’s operating
manual included with the unit.
K5800G Manual 11/30/01 5:02 PM Page 4