Kodak C800 - Manual (Page 32)

27
PRINT-QUANTITY SELECT
This feature lets you choose before you
take the picture the number of prints
from 0 to 9 you will receive from the
photofinishing lab. This service is
dependent on the photofinishers
capability.
1. Open the
CONTROL
-
PANEL COVER
(18)
located below the LCD PANEL (15).
2. Press the PRINT - QUANTITY
BUTTON (42) once with the control-
button activator on camera strap.
• The
LCD panel displays
“ PRINT QUANTITY” and “P1.”
3. Press repeatedly the print-quantity
button to select the number of prints
you want.
• You can view the numbers “ P1,”
“ P2,” etc., in the
FRAME COUNTER
(24)
area on the LCD panel.
4. Press the ENTER BUTTON (39) to
complete your selection.
• After you take the picture, the print
quantity defaults to 1.
Canceling print-quantity select
You can cancel the selected print
quantity after you take the picture and
before you take the next picture.
1. Press and hold the PRINT - QUANTITY
BUTTON (42).
2. Release the button when the motor
stops running.
• The film will rewind one frame to
rewrite the data.
3. See PRINT-QUANTITY SELECT,
steps 2 through 4, to select a different
quantity or bypass steps 2 through 4
if the default is to resume at P1.
SELECT TITLE PRINT DATE ENTER