Kaidan Tripod - Manual (Page 6)

KiWi Rotator Base
Tripod threaded bushing adapter
The KiWi comes with a tripod adapt-
er bushing which accommodates both
1/4-20 inch and 3/8-16 inch threaded
tripod mounts.
1/4 inch Tripod
If your tripod has a 1/4 inch threaded
mount, leave the brass bushing in the
center hole in the bottom of the rota-
tor as shown at lower left.
3/8 inch Tripod
If your tripod has 3/8 inch threaded
mount, remove the brass bushing by
unscrewing it in a counterclockwise
direction and screwing it into the
adjacent hole in a clockwise direction
using a coin (or large screwdriver) as
shown at lower right.
Use the spare outer hole to store the
brass bushing when you're using the
3/8 inch thread. That way, you won't
lose the bushing!
5
Adapter
Bushing
1/4-20 Thread with Bushing in cen-
ter position
3/8-16 Thread with Bushing in stor-
age position