Lincoln Electric COMMANDER 500 - Manual (Page 29)

C-2 ACCESSORIES C-2
COMMANDER 500
RECOMMENDED OPTIONAL
EQUIPMENT
STICK
K704 Accessory Kit which includes:
• Electrode holder and cable.
• Ground clamp and cable.
• Headshield.
K857 Remote Control Kit is optional for remote cur-
rent control.
TIG
Magnum TIG Torch
Magnum Parts Kit and Argon gas
K930-ALL TIG Module (not required for scratch start
DC TIG welding)
K936-1 Control Cable
K870 Foot Amptrol
Also available:
K963-1/-2 Hand Amptrol
K814 Arc Start Switch
K937-45 Control Cable Extension
K844-1 Water Valve
WIRE FEED WELDING OPTIONS
• LN-25 • LN-7
• LN-23P • LN-8
• NA-3 • Spool Gun & K488 Module
• LN-742
HIGH FREQUENCY GENERATORS FOR
TIG APPLICATIONS
The K799 Hi-Freq Unit and the K930-ALL TIG Modules
are suitable for use with the Commander 500. The
Commander is equipped with the required R.F. bypass
circuitry for the connection of high frequency generat-
ing equipment. The high frequency bypass network
supplied with the K799 Hi-Freq Unit does NOT need
to be installed into the Commander.
The Commander and any high frequency generating
equipment must be properly grounded. See the K799
Hi-Freq Unit and the K930-All TIG Module operating
manuals for complete instructions on installation, oper-
ation, and maintenance.