Lexmark 4227 - Manual (Page 50)

Chapter 3: Using the Operator Panel
44
Using the Operator Panel
Control Options
(continued)
TOF Read
Tells the printer to check the TOF
after each new sheet is loaded.
Enable, Disable
Menu Language
Changes the language used on the
operator panel.
English, French,
German, Italian, Spanish
Emulation Options Emulation IBM, EPSON
Character Table Italics, Graphics
International Character U.S.A., France, Germany,
U.K., Denmark I,
Sweden, Italy, Spain I
Interface Options Interface
Allows you to switch from parallel
to serial protocols. If serial is
chosen, you must also set the
italicized options that follow to
match those of your computer.
Parallel, Serial RS-232
Switch between RS-232
or RS-422 serial
interface using the
interface mode switch
(for help, see
“Connecting the Serial
Cable” on page 12).
Data Speed
Does not appear if “Parallel” is
selected for “Interface”.
150, 300, 600, 1200,
2400, 4800, 9600, 19200
bps
Data Bits
Does not appear if “Parallel” is
selected for “Interface”.
8, 7
Parity
Does not appear if “Parallel” is
selected for “Interface”.
No, Ignore, Odd, Even
Main Menu Primary Options Secondary Options