Land Pride RTR1058 - Manual

138
Rotary Tillers
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
RTR10 Series
Model RTR1042 RTR1050 RTR1058
Recommended Tractor PTO HP 17 to 25 Horsepower (25 hp maximum)
Weight 403 lbs. 430 lbs. 474 lbs.
Tilling Width 42" 50" 58"
Overall Width 47 5/16" 55 5/16" 63 5/16"
3-Point Hitch Type Category l, Adjustable Lower Hitch Clevis with Plated Pins
Fits Land Pride Quick-Hitch
Offset Capabilities Yes, Cannot offset with Quick-Hitch
Sideshift Dimensions Centered
Shifted Right
Shifted Left
16” - 26”
13” - 29”
23” - 19” 25” - 25”
18” - 32”
32” - 18” 29” - 29”
22” - 36”
36” - 22”
Number of Tines per Flange 4
Tine Construction Alloy steel heat treated “C” shaped blades
Skid Shoes Adjustable
Storage Stands Adjustable
Rear Deflector Adjustable profile stamped rear deflector
Front Deflector Rubber
Driveline Category II
Off-Center Shear bolt - standard
Slip Clutch - optional
Gearbox 25 HP input at 540rpm 1.92:1 ratio
Cast iron housing, straight bevel gears
Gearbox Lubrication & Oil Capacity 2 Pints of SAE 80-90W EP oil
Drive Chain #80 Roller chain - Fully enclosed in oil bath with drain & fill plugs
Drive Chain Lubrication Shell Alvania EP 00 or equivalent
Sprockets Case hardened teeth, splined bores
Rotor Swing Diameter 15"
Rotor Shaft Speed 225 rpm at 540 rpm PTO
311-431S continue on next page
26796
5/10/11