Lightolier Lytespan Track Lighting System 8277 - Manual

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2009 Philips Group • B0509
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lytespan ® Track Lighting System
8277
Page 1 of 2 Lyteflood ® 24 Compact Fluorescent
Features
1. Attachment Fitting: Molded polycarbonate integral color, fitting rotates
into track and locks on with push tabs.
2. Brass Contact: Extends for connection to 2nd circuit in Advent ® Lytespan
track.
3. Electronic Ballast: .45 amps. Input power 54.
4. Reflector: Specular Plus
® * finish.
5. Track Adapter Housing: Die-cast aluminum.
6. Body: Extruded aluminum.
7. Louver Tabs: Molded in, snap into body, holds louver in place.
8. Louver with Parabolic Blades: Molded ABS, semi-specular finish.
9. Lamp Socket
10. End Cap: (2) Die-cast aluminum.
11. Pivot Tension Mount: 0° - 90° vertical rotation.
12. Pivot Tension Mount: 355° horizontal rotation.
13. Push Tab: Locks and detaches unit.
14. Ballast Housing: Die-cast aluminum.
15. (2) 24W/27W Twin Tube: Compact fluorescent lamps (by others).
16. Lamp Support Clip (2)
Electrical
2 Lt. Rapid start, high power factor, electronic ballast. Min. starting temp. 0°F.
Lampholder and ballast prewired with 105°C 18 ga. wire. Input voltage 120V.
Ordering Information
Catalog No. Mounting Finish Lamps
8277EWH All Lytespan Track Systems Matte White 2 Lt. 24W/27W Twin Tube Fluorescent
8277EBK DO NOT attach to stem mounted track Matte Black PL-L24W by Philips
(unless used with suspension beam F27/24BX by GE
housing) or track mounted with swivel FT24DL by Osram Sylvania
stem (7480, 7481) or wall mounted track.
Finish
All painted finishes baked enamel.
Labels
UL, I.B.E.W.
* Specular Plus ® is a registered trademark of MSC Laminates and
Composites Inc.
Advent ® is a registered trademark of Lightolier.