Lindy CAT5 - Manual (Page 2)

User Manual English
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - 2nd EDITION (November 2003)
Package Contents
1. CAT5 KVM Extender LITE Local Unit
2. CAT5 KVM Extender LITE Remote Unit
3. 2 Power Adaptors
4. User Manual
If anything is damaged or missing, please contact your supplier
.
Features
 Local and remote units connect (up to 150m apart) over standard CAT 5 or higher cable
 Signal amplification and compensation
 PS/2 keyboard/mouse ports
 Dual console operation - Control your system from both the local and remote consoles
 High resolution video - Up to 1280 x 1024 for distances of up to 75m
 Supports VGA, SVGA and Multisync Monitors
 Adjustable GAIN control to improve video quality at longer distances
 GREEN CALIBRATION button to reduce green colouration on the remote monitor
 RESET button to resynchronize an unresponsive keyboard or mouse at either module
 No software or driver installation required – compatible with most commonly used operating systems
Note: You can control numerous remote systems from a single console by combining the KVM EXTENDER LITE
with a KVM switch. An extensive range is available from LINDY, including desktop or professional server solutions.
System Requirements
 VGA, SVGA or Multisync monitor capable of the highest resolution that you will be using on any computer
in the installation
 PS/2 keyboard and mouse
Note: You must use the same brand and model of mouse on both the local and remote units.
Requirements for Cables
For optimum signal integrity and to simplify the layout, we strongly recommend that you use high quality PS/2 and
VGA cables such as LINDY Combined 3-in-1 KVM cables.
Category 5 cable is the minimum required to connect the local and remote KVM EXTENDER LITE units. Using
lower quality cable will result in a degraded video signal.
UTP, STP, FTP or PIMF, CAT5 or higher cable may be used.