Keyless entry keypad procedure, Childproof door locks, Locks and security – Lincoln 2009 MKZ User Manual

Page 86

Advertising
background image

6. To enable/disable the autounlock feature, press the lock control, then
press the unlock control. The horn will chirp once if autounlock was
deactivated or twice (one short and one long chirp) if autounlock was
activated.

7. Turn the ignition to the off position. The horn will chirp once to
confirm the procedure is complete.

Keyless entry keypad procedure

1. Turn the ignition to the off
position.

2. Close all the doors.

3. Enter factory–set 5–digit entry
code.

4. Press and hold the 3

• 4. While holding the 3 • 4, press and release

the 7

• 8. While still holding the 3 • 4, press and release the 7 • 8 a

second time.

5. Release the 3

• 4.

The user should receive a horn chirp to indicate the system has been
disabled or a chirp followed by a honk to indicate the system has been
enabled.

CHILDPROOF DOOR LOCKS
• When these locks are set, the

rear doors cannot be opened from
the inside.

• The rear doors can be opened

from the outside when the doors
are unlocked.

The childproof locks are located on
rear edge of each rear door and
must be set separately for each
door. Setting the lock for one door
will not automatically set the lock for both doors.
• Insert the key and turn to the lock position (key at an angle) to

engage the childproof locks.

• Insert the key and turn to the unlock position (key horizontal) to

disengage the childproof locks.

2009 MKZ (378)
Owners Guide
USA
(fus)

Locks and Security

86

Advertising