How to install your microsdt, How to remove your microsdtm, Battery charge level – LG Chocolate 3 User Manual

Page 21: Signal strength, How to install your microsd, Card 19, Card, How to remove your microsd, Locate the microsd

Advertising
background image

How to Install Your microSD

TM

Card

1. Locate the microSD

TM

slot on the

right side of the phone and gently
uncover the slot opening.
(microSD™ slot cover stays
attached to the phone so you don't
lose it).

2. Insert the microSD

TM

card in the

correct direction until it clicks into
the slot. If you insert the card in
the wrong direction, it may
damage your phone or your card.

How to Remove Your
microSD

TM

Card

Gently press and release the exposed
edge of the microSD

TM

card, then

remove it from the slot and replace
the cover.

NOTES

Do not attempt to remove the microSD

TM

card while reading or writing to the card.

Users wishing to transfer or download music

onto a MicroSD™ card inserted into this

phone (through either MTP Sync or Over the

Air) should format the MicroSD™ card on

this handset before using it through(Menu ->

Settings & Tools -> Memory -> Card

Memory -> Options -> Format). Warning:

Formatting the MicroSD™ card will erase all

contents on the card. In the event the

MicroSD™ card is used on this phone

without first formatting it,the phone will

display a “License acquisition failed” during

OTA downloading or MTP Sync. Song files

downloaded or otherwise purchased from

third party providers and stored on a

MicroSD™ card inserted into this device

may be protected or encrypted by such

provider and cannot be played on this

device.

Battery Charge Level

You can find the battery charge
level

at the top right of the

LCD screen. When the charge level
becomes low, the battery sensor
sounds a warning tone, blinks the
battery icon, and displays a
warning message. As the charge
level approaches empty, the phone
automatically switches off without
saving.

Signal Strength

Call quality depends on the signal
strength in your area. You can tell
how much signal strength you have
by the number of bars next to the
signal strength icon:

the

more bars, the stronger the signal.
If you’re having problems with
signal quality, move to an open area
or, when inside a building, try
moving near a window.

19

NOTE

A memory card is sold

separately.

Advertising