Listen Technologies Satellite Radio - Manual (Page 34)

28
LT-800
LT-803-072
Process Mode
Process mode is used for Audio Gain Control (AGC). Press and hold the down button for 10 seconds to
activate program mode. Press up button to toggle process On/Off. With the process mode enabled,
the LT-803-072 will automatically adjust for inconsistent signal input levels by raising or lowering the
signal level accordingly. This feature should be used in applications where a consistent sound level is
important and the input levels vary substantially. Typically you would not want to engage the Process
Mode when a speaker’s emphasis is critical to the message they are conveying.
LT-803-072 Operating Instructions
LT-803
4
Process