Lucent Technologies Voice Terminal 8410 - Manual (Page 2)

2
4 Dial outside number, extension, or feature access
code you want to store (up to 24 digits).
5 Press .
6 Repeat Steps 3 through 5 to program additional
buttons.
7 Hang up.
To place an AD call
1 Pick up handset or press .
2 Press selected AD button.
To program/reprogram an outside number,
extension, or feature access code into a
personal list
1 Pick up handset.
NOTE: For speakerphone users, press a call
appearance button.
2 Press softkey below Prog (for display users)
or Press
or Dial AD Program access code ________.
3 Dial Personal List number (1, 2, or 3).
4 Dial list item (1, 2, 3...).
5 Dial number you want to store (up to 24 digits).
6 Press .
7 Repeat Steps 4 through 6 to program additional
items on the same list.
8 Hang up.
To place a call using an AD list button or access
code
1 Press or or
or Dial appropriate AD List access code:
•
List 1 __________
•
List 2 __________
•
List 3 __________
NOTE: An may also be available.
2 Dial desired list item (1, 2, 3...).
#
Speaker
Program
#
Pers List Grp List Sys List
Enhcd List
8410.qref.def3 Page 2 Monday, August 17, 1998 9:09 AM