Loewe TV 32 HD/DR+ - Manual (Page 18)

18
Operation of additional equipment
Pause (PAUSE)
Next chapter (only for DVD)
Previous chapter (only for DVD)
Record
Perform selected function
When you start a recording, the program you
have just selected is recorded. You cannot
switch over to another channel, it is locked. You
can only switch over when the recording has
finished.
Exceptions:
1. You have installed several tuners (not PIP
tuners) in the TV set, then you can watch
another channel with the second tuner.
2. You can also watch the signal via an AV
connection (e.g. DVD player or a second
VCR).
3. In a VCR with Digital Link Plus the VCR
tuner is used for the recording (not for
satellite programs).
Video menu
Show the Video menu
●
▼
▼
❚❚ You can change and delete timer data or pro-
gram new recordings in the ”Timer” menu.
The ”Record” menu gives you the option for
timer programming by EPG, teletext or manu-
ally.
You can call the archive list with ”DR Archive”
if a Digital Recorder is built in.
In the ”Connections” menu you can log other
AV equipment on or off. In the ”Digital Link
Plus transfer” menu the station data of the TV
set (not satellite stations) are transmitted to
the Digital Link Plus VCR.
In the Settings menu you can enter the record
lead and follow on time and serial recording
tolerance.
Digital Link Plus VCRs have the possibility for
transferring the station data from the TV set to
the VCR via the Euro-AV cable (not for satellite
stations). Every time you change the station
memory of the TV, you are asked whether you
want to make a data transfer.
The receiver unit of the VCR is always used for
recording with a Digital Link Plus video re-
corder (not satellite stations) and the tuner of
the TV set is available for watching TV.
Loewe VCRs also have Digital Link, a system
for controlling Loewe VCRs via the Euro-AV
cable. If the Loewe VCR only has Digital Link,
the TV tuner is used for recording. If you have
installed your Loewe VCR in a concealed place,
you can operate the Loewe VCR with the re-
mote control.
Digital Link must be switched on on the
video recorder.
Only use fully wired Euro-AV cables, otherwise
Digital Link or Digital Link Plus will not work.
Video mode
You can operate Loewe video recorders and DVD
players with the video control bars even if they
are hidden. The VCR’s must be connected to the
Euro AV sockets (Scart) and logged in under the
”Connections” menu.
Digital Link must be switched on on the Loewe
video recorder. Only then can you use the con-
trol bar. You also need Digital Link or Digital Link
Plus for timer recordings of satellite programs
controlled by the TV set.
You can display up to three control bars but they
are only displayed by logged in VCR’s and DVD
players.
Show/hide video control bar:
Select the video control bar if for
example several VCR’s or a DVD
player are connected.
Select function
Switch VCR/DVD on/off
Select video input (Euro-AV
socket) on the VCR
Rewind (only for VCR) or Scan in
rewind
Stop (STOP)
Playback (PLAY)
Fast forward (only for VCR) or
Scan in fast forward
OK
The Video menu provides you with the following
options:
Video menu
DR archive
Connections
Settings
Back
Info
End
Recording
Timer
OK
INFO
MENU
END
STOP
▼ ▼
▼ ▼ ▼ ❚❚ ■
AUX
VCR STOP
▼ ▼
▼ ▼ ▼ ● ❚❚ ■
Menu
Info
End
DVD
▼
▼
OK
INFO
MENU
END
▼ ▼
■
▼
AUX
▼ ▼
OK
OK
BAQ2550H_31310_021_4_GB 22.07.2004, 10:15 Uhr 18