Lanier LD075 User Manual
Page 66
Copying
58
2
Selecting [Same Width]
A Press the [Same Width] key.
B Set an erase border width with
the [
n
n
n
n] and [o
o
o
o] keys.
Note
❒ To change the value entered,
press the [
n
n
n
n] and [o
o
o
o] keys
to set the new value.
C Press the [OK] key.
Selecting [Diff. Width]
A Press the [Diff. Width] key.
B Press the key for the border
you wish to change, and set an
erase border width with the
[
n
n
n
n] and [o
o
o
o] keys.
C Press the [OK] key.
EEEE
Press the [2-sided Setting] key and
the [Back Side] key.
Note
❒ If you don't need to erase the
border of the back of the origi-
nal, go to step
G.
FFFF
Set the border to be erased from
of the back.
Note
❒ Erasing the border of the back is
valid only when you copy 2-sid-
ed originals.
GGGG
Press the [OK] key.
HHHH
Place your originals, and then
press the
{{{{Start}}}} key.
Center Erase
AAAA
Press the [Edit/Stamp] key.
BBBB
Press the [Erase] key.
CCCC
Press the [Erase Center/Border] key.
DDDD
Press the [Center] key.
EEEE
Set the erase center width with
the [
n
n
n
n] and [o
o
o
o] keys, and then
press the [OK] key.
FFFF
Press the [2-sided Setting] key and
the [Back Side] key.
Note
❒ If you don't erase the center of
the back of the original, go to
step
H.
GGGG
Set the center to be erased from of
the back.
Note
❒ Erasing the center of the back is
valid only when you copy 2-sid-
ed originals.
MartiniC1_GBcopy4_FM.book Page 58 Tuesday, April 23, 2002 6:23 PM