Input/output 1/2, Input/output – Lanier LD075 User Manual

Page 114

Advertising
background image

User Tools (Copy/Document Server Features)

106

5

Input/Output

1

/

2

Switch to Batch (SADF)

You can have Batch mode or SADF
mode have displayed when you
press the Special Original key.

p.14 “Batch mode”

SADF Auto Reset

When you set one original at a time
in the document feeder, the Auto
Feed

indicator lights for a selected

time after an original is fed, to
show is ready for another original.

Note

❒ You can adjust this time from 3

seconds to 99, in 1 second incre-
ments.

Rotate Sort: Auto Paper Continue

You can specify to continue copy-
ing when paper of the required ori-
entation has run out during rotate-
sorting.

⇒ p.35 “Rotate Sort”

Note

❒ If you select [No]:

• When paper of the required

orientation runs out, the ma-
chine stops copying and
prompts you to supply copy
paper. When you load paper,
the machine will continue
copying.

❒ If you select [Yes]:

• Copying continues using pa-

per of a different orientation.
The copy job will finish even
if you have left the machine.

Auto Sort

You can have Sort mode selected
when the machine is turned on or
reset, or if the mode is cleared.

Memory Full Auto Scan Restart

If memory becomes full while
scanning originals, the machine
can make copies of those already
scanned, and then automatically
resume scanning the remaining
originals.
You can enable or disable this
function.

Note

❒ If you select [No]:

• When memory becomes full,

the machine stops operation
allowing you to remove cop-
ies delivered to the output
tray.

❒ If you select [Yes]:

• You can leave the machine

unattended to make all the
copies, but the resulting pag-
es will not be sequentially or-
dered.

Select Stapling Position (Top Left)

You can register a type of stapling
used frequently in the top left sta-
ple key on the initial display. You
can also change the registered
type.

Note

❒ The Finisher 3000B(100–sheet

staples), Finisher 3000M(50–
sheet staples) or Booklet Finish-
er is required to use this func-
tion.

MartiniC1_GBcopy4_FM.book Page 106 Tuesday, April 23, 2002 6:23 PM

Advertising
This manual is related to the following products: