Lanier LD075 - Manual (Page 20)

Placing Originals
12
1
Placing Originals
Note
❒ Place originals after correction flu-
id and ink have completely dried.
Not taking this precaution could
dirty the exposure glass with
marks that will be copied.
Reference
For document sizes you can set. ⇒
p.7 “Originals”.
Original Orientation
When you place the original into the
document feeder, place it face up so
you can see the print.
When you place the original on the
exposure glass, place it face down.
1. Document feeder
2. Exposure glass
When you cannot place originals as
described because the size is A3 or A4
or because of its condition, you can-
not staple copies as you want. In this
case, select
as the Original Orien-
tation.
Example: When you want to staple
copies, but you cannot select
be-
cause the original size is A3
K, select-
ing enables you to staple copies
correctly.
Note
❒ It is recommended to use this func-
tion together with the Auto Paper
Select or Preset Reduce/Enlarge
function.
AAAA
Press the [Special Original] key.
BBBB
Select the original orientation
(
or ) and press the [OK]
key.
1
2
MartiniC1_GBcopy4_FM.book Page 12 Tuesday, April 23, 2002 6:23 PM