Lanier LD075 - Manual (Page 26)

Copying
18
2
Auto Start
Copy starts automatically when the
machine is ready.
AAAA
Set the copy contents while “Se-
lect copy mode and press
{{{{Start}}}}”
and “Scanning originals can be
started” are displayed alternately.
BBBB
Set the original.
CCCC
Press the
{{{{Start}}}} key.
The machine scans the original.
When the machine is ready, it
starts copying automatically.
Interrupt Copy
Use this function to interrupt a long
copy job to make urgently needed
copies.
AAAA
Press the {{{{Interrupt}}}} key.
When the originals stop scanning
A Remove originals that have
been copied and place origi-
nals you wish to copy.
B Press the {{{{Start}}}} key.
The machine starts making your
copies.
C When the copy job is finished,
remove originals and copies.
D Press the {{{{Interrupt}}}} key again.
The Interrupt indicator goes off.
E When the display prompts
you, set the remaining origi-
nals again before interrupting.
F Press the {{{{Start}}}} key.
Note
❒ By pressing the {{{{Start}}}} key,
the previous copy job set-
tings will be restored and the
machine will continue copy-
ing from where it left off.
When the machine keeps
copying
A Place the originals you wish to
copy.
B Press the {{{{Start}}}} key.
The machine stops the other
original job and starts copying
your original.
C When copying is complete, re-
move the originals and copies.
D Press the {{{{Interrupt}}}} key again.
The Interrupt indicator goes off.
The previous copy job settings
will be restored and the ma-
chine will continue copying
from where it left off.
Original Beeper
The beeper sounds and an error mes-
sage is displayed when you leave the
originals on the exposure glass after
copying.
Reference
⇒ p.99 “Tone: Original remains”
ZGVS020E
MartiniC1_GBcopy4_FM.book Page 18 Tuesday, April 23, 2002 6:23 PM