Directional size magnification (mm) – Lanier LD075 User Manual
Page 42
Copying
34
2
AAAA
Press the [Reduce/Enlarge] key.
BBBB
Press the [Specifd. Ratio] key.
CCCC
Press the [Direct. Mag.%] key.
To enter a ratio with the number
keys
A Press the [Horizontal] key.
B Enter the desired ratio with the
number keys, followed by the
[#]
key.
C Press the [Vertical] key.
D Enter the desired ratio with the
number keys, followed by the
[#]
keys.
E Press the [OK] key.
To specify a ratio with the [
n
n
n
n]
and [
o
o
o
o] keys
A Press the [With n
n
n
no
o
o
o] key.
B Press the [Horizontal] key.
C Adjust the ratio using the [n
n
n
n]
or [
o
o
o
o] keys.
Note
❒ Pressing the [n
n
n
n] or [o
o
o
o] keys
changes the ratio in 1% steps.
Pressing and holding down
the [
n
n
n
n] or [o
o
o
o] keys changes
it in 10% steps.
❒ If you have incorrectly en-
tered the ratio, readjust the
ratio with the [
n
n
n
n] or [o
o
o
o]
keys.
D Press the [Vertical] key.
E Adjust the ratio with the [n
n
n
n]
or [
o
o
o
o] keys.
F Press the [OK] key.
DDDD
Press the [OK] key.
EEEE
Place your originals, and then
press the
{{{{Start}}}} key.
Directional Size Magnification
(mm)
Suitable reproduction ratios will be
automatically selected when you en-
ter the horizontal and vertical lengths
of the original and copy image you re-
quire.
1.
Horizontal original size
2.
Vertical original size
3.
Horizontal copy size
4.
Vertical copy size
Note
❒ Specify the vertical and horizontal
sizes of the original and those of
the copy, as shown in the illustra-
tion.
MartiniC1_GBcopy4_FM.book Page 34 Tuesday, April 23, 2002 6:23 PM