Lanier LD075 - Manual (Page 43)

Copy Functions
35
2
❒ You can enter sizes within the fol-
lowing ranges.
AAAA
Press the [Reduce/Enlarge] key.
BBBB
Press the [Specifd. Ratio] key.
CCCC
Press the ["Dir. Size Mag mm"] key.
DDDD
Enter the horizontal size of the
original with the number keys,
and then press the [#] key.
EEEE
Enter the horizontal size of the
copy with the number keys, and
then press the [#] key.
FFFF
Enter the vertical size of the origi-
nal with the number keys, and
then press the [#] key.
GGGG
Enter the vertical size of the copy
with the number keys, and then
press the [#] key.
Note
❒ To change a length, press the
key you wish to change and en-
ter the new value.
HHHH
Press the [OK] key.
IIII
Press the [OK] key.
JJJJ
Place your originals, and then
press the
{{{{Start}}}} key.
Sort
The machine can scan your originals
into memory and automatically sort
the copies.
Reference
Related Initial Settings
⇒ p.107 “Select Stack Function”
⇒ p.106 “Memory Full Auto Scan
Restart”
⇒ p.106 “Rotate Sort: Auto Paper
Continue”
⇒ p.97 “Auto Tray Switching”
❖ ❖ ❖ ❖ Sort
Copies are assembled as sets in se-
quential order.
❖ ❖ ❖ ❖ Rotate Sort
Every other copy set is rotated by
90
°(KL) and delivered to the
copy tray.
Note
❒ To use the Rotate Sort function,
two paper trays with paper
identical in size but different in
direction (
KL) are required.
Metric
version Vertical: 1 – 999 mm (in 1 mm
steps)
Horizontal: 1 – 9999 mm (in 1
mm steps)
Inch
version Vertical: 0.1” – 99.9” (in 0.1”
steps)
Horizontal: 0.1” – 99.9” (in
0.1” steps)
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3 2
1
3
MartiniC1_GBcopy4_FM.book Page 35 Tuesday, April 23, 2002 6:23 PM