Lucent Technologies Stinger STGR-SO-ADSL2P - Manual (Page 2)

To learn more, contact your local Lucent
Technologies Representative, Authorized
Reseller, or Sales Agent.
Or, visit our Web site at www.lucent.com
Specifications subject to change without
notice.
This document is for planning purposes
only, and is not intended to create,
modify or supplement any Lucent
Technologies specifications or warranties
relating to these products or services.
Information and/or technical
specifications supplied within this
document do not waive (directly or
indirectly) any rights or licenses –
including but not limited to patents or
other protective rights – of Lucent
Technologies or others.
Stinger is a registered trademark of
Lucent Technologies.
Copyright © 2004
Lucent Technologies, Inc.
Printed in the U.S.A.
Stgr v1.0404
Technical Specifications
8.Interface Standard s
ANSI T1.413 Issue 2 (full-rate)
ITU G.992.1 (G.dmt)
– Annex A (line sharing with POTS)
– Annex B (line sharing with ISDN)
– Annex C (coexist with Japanese ISDN)
ITU G.992.2 (G.lite)
– Annex A (line sharing with POTS)
– Annex C (coexist with Japanese ISDN)
ITU G.994.1 (G.hs)
ITU G.997.1 (physical layer management)
ITU-T G.992.3 ADSL2 specifications
ITU-T G.992.4 ADSL2-Lite specifications
ITU-T G.992.5 ADSL2+ specifications
9.Performance
G.dmt, Annex A: Maximum 8.064 Mbps
downstream, 1.024 Mbps upstream
G.dmt, Annex B: Maximum 8.064 Mbps
downstream, 1.024 Mbps upstream
Standard G.lite, Annex A: Maximum
1.536 Mbps downstream, 512 Kbps
upstream
Turbo G. lite, Annex A: Maximum 3.424
Mbps downstream, 832 Kbps upstream
ADSL2/ADSL2+: supports standard
downstream and upstream rates
10.Range
Maximum 28,000 ft (full rate mode)
Maximum 26,200 ft (G.lite mode)
ADSL2/ADSL2+: supports distances as
per the standards
11.Model Numbers
STGR-LIM-AP-48: 48-port
ADSL/ADSL2/ADSL2+ for
Stinger FS+/FS and LS
STGRRT-LIM-AP-48: 48-port
ADSL/ADSL2/ADSL2+ for Stinger RT
STGRCR-LIM-AP-48: 48-port
ADSL/ADSL2/ADSL2+ for Stinger CR
STGR-SO-ADSL2P: software option to
enable ADSL2/ADSL2+ mode
STGRSACR-SO-ADSL2P: software
option to enable ADSL2/ADSL2+
mode for the Stinger CR
1.Dimensions
Height: 15 in (38.1 cm)
Width: 1.06 in (2.69 cm)
Depth: 9 in (22.8 cm)
2.Weight
4.0 lb (1.8 Kg)
3.Power Requirements
106 W maximum
4.Operating Requirements
Temperature:
FS+/FS/LS version:
32° - 131° F (0° - 55° C)
RT/CR version:
-40° - 149° F (-40° - 65° C)
Relative humidity:
10% - 90 % (non-condensing)
Operating altitude:
Up to 13,123 ft (4,000 m)
5.Electromagnetic Compliance
FCC Part 15 Class A
EN55022 Class A
AS/NZS3548 Class A
VCCI Class 1
CISPR Class A
6.Certification
Telcordia GR-63-CORE
(NEBS Level 1-3)
Telcordia-GR-1089-CORE
EN / IEC 60950
7.Status Indicators
ACTIVE (Green): LIM is fully operational
STBY (Orange):
LIM is designated redundant spare
B Y PASS (Orange):
LIM currently bypassed
FA U LT (Orange): Fatal error detected
Per Port (Green): Port is active, data
being passed