Lava Computer SP-PCI - Manual (Page 2)

Windows Hardware and
Driver Installation
PCI Slot
Screw for attaching card bracket
to PC casing
Serial Port
Parallel Port
1. Before opening the casing of your computer, make sure that all
power is off.
2. Locate an unused PCI slot and insert the SP-PCI card into it. Ensure
that the card is well seated.
3. Screw the metal bracket of the SP-PCI card to your PC’s casing and
replace the machine’s cover.
4. Turn the PC on.
5. When Windows starts, it will find an SP-PCI Controller and will ask
you for a driver for this device. When prompted, insert the
installation diskette into your floppy drive. After copying the
necessary files from the diskette, Windows may restart your PC in