Lanier LD 035 - Manual (Page 34)

Copying from the Bypass Tray
19
2
Note
❒ If the guides are not flush with
the copy paper, images might
be skewed or paper misfeeds
might occur.
❒ Do not stack paper over the lim-
it m a rk , o t h e rw is e i m a g e s
might be skewed or paper mis-
feeds might occur.
❒ Swing out the extender to sup-
port paper sizes larger than
A4
L, 8 1 /
2
"
× 11"L.
❒ Fan paper to get air between the
sheets and avoid a multi-sheet
feed.
CCCC
Select the type and size of the pa-
per.
When copying onto standard size
paper
A Press the {{{{#}}}} key.
B Press [Select Size].
C Select the paper size.
D Press [OK].
When copying onto custom size
paper
Note
❒ Paper will be automatically de-
livered to the internal tray.
A Press the {{{{#}}}} key.
B Press [Custom Size].
C Press [Vertical mm], enter the
vertical size with the number
keys, and then press the [#]
key.
D Enter the horizontal size of the
paper with the number keys,
and then press the [#] key.
Note
❒ If [Horiz mm] is not highlight-
ed, press [Horiz mm].
❒ To register the custom size
entered, press [Program], and
then press [Exit].
E Press [OK].
When copying onto special paper
A Press the {{{{#}}}} key.
B Select paper type in Special pa-
per.
C Press [OK].
AdonisC3_GBcopyF_FM1.book Page 19 Thursday, November 28, 2002 1:53 PM