LevelOne FSW-1600FXT - Manual (Page 8)

A-2
8 Port Fiber Switch
Technical Specifications
Standards Compliance : IEEE802.3u and 802.3x 100Base-FX
Transmission Mode
: Full or Half duplex
Transmission Speed : 100Mbps
Packet forwarding/filtering Rate:
148,800 packets / sec full wire rate on 100Mbps forwarding and filtering
MAC Address and Self-learning: up to 12K
Buffer Memory
: 1024KB for 8 ports
Flow control : IEEE802.3x compliant for full-duplex
Back pressure flow control for half-duplex
Network Interface :
¾ 8ST.M : Eight ST multi-mode fiber ports
¾ 8SC.M : Eight SC multi-mode fiber ports
¾ 8SC.S : Eight SC single-mode fiber ports
Cable and Maximum length:
50/125, 62.5/125 or 100/140 m m multi-mode, up to 2Km
FX(Fiber)
8.3/125, 8.7/125, 9/125 or 10/125 m m single-mode, up to 15Km
Selectable Duplex Mode Switch: Per fiber port FDX/HDX DIP switch
Diagnostic LED:
System LED : Power
Per Port LED : Link/Act, 100Mbps, FDX/Col
Power Requirement : AC Line
Voltage : 100 ~ 240 V
Frequency : 50 ~ 60 Hz
Consumption : 43W Max.
Ambient Temperature : 0 ° to 50 ° C
Humidity : 5% to 90%
Dimensions : 44(H) ´ 440(W) ´ 200(D) mm
Complies with FCC Part 15 Class A & CE Mark Approval