Lexmark 1300 Series - Manual (Page 50)

Mode Description Power consumption (Watts)
Power Saver The product is in energy-saving mode. not applicable
High Off The product is plugged into a wall outlet, but the power switch is turned off. not applicable
Low Off (<1 W Off) The product is plugged into a wall outlet, the power switch is turned off, and the
product is in the lowest possible power consumption mode.
not applicable
Off The product is plugged into a wall outlet, but the power switch is turned off. 3
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be
substantially higher than the average.
Values are subject to change. See www.lexmark.com for current values.
Power Saver
This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to the EPA Sleep Mode.
The Power Saver Mode saves energy by lowering power consumption during extended periods of inactivity. The Power Saver Mode is
automatically engaged after this product is not used for a specified period of time, called the Power Saver Timeout.
Factory default Power Saver Timeout for this product (in minutes): not applicable
Off mode
If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption,
disconnect the power supply cord from the wall outlet.
Total energy usage
It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts,
the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total
product energy usage is the sum of each mode's energy usage.
End-user license agreement
Opening this package, installing the printing device software, or using the print cartridges inside, confirms your acceptance of the following
license/agreement: The patented print cartridges contained inside are licensed for a single use only and is/are designed to stop working
after delivering a fixed amount of ink. A variable amount of ink will remain in the cartridge when replacement is required. After this single
use, the license to use the print cartridge terminates, and the used cartridge must be returned only to Lexmark for remanufacturing,
refilling or recycling. If you do not accept the terms of this single use license/agreement, return this product in its original
packaging to your point of purchase. A replacement cartridge sold without these terms is available at www.lexmark.com.
50