LST SG70-1 User Manual
Description
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
SG70-1_DBL_LST_EN_0913.PDF • PAGE 1
A
Building Safety. Building Security.
Description
The Remote Tableau SG70-1 is designed for the indi-
cation of the events and operating conditions of Fire
Detection Control Panels Series BC216 and BC016 at
a remote site. Furthermore, important operations of the
fi re detection system can be carried out on the remote
tableau.
On the integrated 4-line LC display, the events of the fi re
detection system are indicated as clear texts and they can
be displayed one after the other by means of the scroll
buttons. Important operating conditions of the fi re detec-
tion system are indicated by LED displays. In addition,
alarms and faults are signalled by the integrated buzzer.
By parameterising the appropriate fi lters and combina-
tions in the PC software PARSOFT, all events or only
selected events of the system can be indicated and
thus be adapted to the requirements of the user. For ex-
ample, fi lters can be set in such a way that one remote
tableau only indicates alarms and technical messages,
while faults are indicated on a further remote tableau.
In the same way, an area tableau for one fl oor or for one
building can be implemented by parameterising combi-
nations in order to restrict the indication of events to
certain zones or actuations.
• Intelligent remote tableau for
Fire Detection Control Panels
Series BC216 and Series BC016
• Indication of the events and operating
conditions of a fi re detection system
• Remote operation of important
system functions
• Optional key switch for authorization
• Connection to the INFO bus
The fi elds „TRANSMITTING DEVICE“ and „ALARMING DE-
VICE“ offer the same function as the fi elds of the Fire De-
tection Control Panel Series BC216 or BC016 to which
the remote tableau is connected. They serve for the re-
mote indication and operation of the primary transmitting
device and of the alarming device that is parameterised
on the control panel.
The button in the „TRANSMITTING DEVICE“ fi eld is used for
toggling between day and night operation of the transmit-
ting device and for starting the alarm delay. By means of
the button in the „ALARMING DEVICE“ fi eld, the activated
alarming device can be silenced or reactivated.