Lennox Hearth SHGL-18MP-R - Manual (Page 9)

NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 9
If you encounter any problems or have any
questions concerning the installation of this
dual-listed gas appliance, please contact your
distributor. For the name of your nearest
distributor contact:
LENNOX HEARTH PRODUCTS
1110 West Taft Avenue
Orange, CA 92865
ACCESSORY COMPONENTS
(Millivolt Models Only)
All options are available in kit form, are easy to
install and are packaged complete with all re-
quired parts and instructions. Some of the
option kits need to be fitted prior to completing
the installation of the appliance. The following
paragraphs detail the kit options available.
The appliances covered in this manual are heater
rated and produce a great deal of heat. Decora-
tive brass trim pieces and hoods may tarnish
because of their proximity to the heater opening
and front face. Tarnishing of these pieces is
normal, unavoidable and should be expected.
Standard Remote Control System
(Model RCL)
The Model RCL (Standard) Remote Control
System, features a simplistic on/off control
function for the fireplace. This model includes
a hand-held transmitter, a remote receiver
with wall-mount coverplate and all hardware
required to install the unit. The remote re-
ceiver can be wall or hearth mounted.
The transmitter has ON and OFF functions that
are activated by pressing either button on the
face of the transmitter. When a button on the
transmitter is pressed, a signal light illumi-
nates briefly to verify that a signal has been
sent.
The Model RCL is designed to operate with all
millivolt ignition systems, as well as electronic
ignition systems. It may be installed with use
for either natural or propane gas appliances.
The RCL offers ease of installation and allows
you to execute on-off commands to the log set
effortlessly with one simple motion.
The Model RCL comes complete with detailed
operating instructions.
Thermostat 89L36 FWTK
Wall Switch Kit 85L87 FWSK
Remote Control System
Standard
H0249 RCL
Remote Control System
Deluxe
H0251 RCL-T
ACCESSORY COMPONENTS Deluxe Remote Control System
(Model RC-STAT)
The Model RCL-T (Deluxe) Remote Control
System has all of the features of the standard
system along with an added easy to read LCD
screen which presents access to many en-
hancements, including; battery power level
indicator, timer, mode of operation, thermo-
static display including room temperature in
either metric of English units, flame indicator
and clock. Fully programmable, the Model
RCL-T allows for virtual command over nearly
all operational and temperature variables, us-
ing the hand held remote control transmitter.
The Model RCL-T (Deluxe) remote control
system is installed in the same manner as the
standard system, may be operated with elec-
tronic and millivolt systems with either natural
or propane gas. The RCL-T comes complete
with detailed operating instructions.
Wall Thermostat Kit*
A wall thermostat kit is available for use with
these appliances. The wall thermostat is de-
signed to be wired directly to the appliance
millivolt gas control circuit and provide auto-
matic On/Off control of the appliance to main-
tain a desired temperature within the room.
Wall Switch Kit*
An optional wall switch kit can be installed
along with all vent-free appliances. The kit
consists of a standard UL wall switch with
cover plate. This kit provides for remote (wall)
operation of the appliance. Replace the wall
switch and cover plate of this kit with the
components of the RCK and you can have true
remote control of your vent-free appliance,
turning it on and off from your favorite easy
chair. The wall switch kit should be installed
along with the appliance.
*Use 18GA, solid two conductor wire to con-
nect these kits to the appliance.