Linksys ULTRA RANGE PLUS WGA600N - Manual (Page 17)

Chapter4
Advanced Configuration
4 Dual-Band Wreless-N Gamng Adapter
Wndows Meda Center Enables the router to recognize
certain audio and video streams generated by a Windows
Media Center PC and prioritize these streams above other
traffic. These streams are used by systems known as
Windows Media Extenders, such as the Xbox 360.
Automatc When enabled, this option causes the router
to automatically attempt to prioritize traffic steams that it
doesn’t otherwise recognize, based on the behavior that
the streams exhibit. This acts to deprioritize streams that
exhibit bulk transfer characteristics, such as file transfers,
while leaving interactive traffic, such as gaming or VoIP,
running at a normal priority.
Add WISH Rule
A WISH Rule identifies a specific message flow and assigns
a priority to that flow. For most applications, the priority
classifiers ensure the right priorities and specific WISH
Rules are not required.
WISH supports overlaps between rules. If more than one
rule matches a specific message flow, the rule with the
highest priority is used.
Enable This option is used to enable WISH.
Name Enter a name for the rule.
Prorty The priority of the message flow is entered here.
Four priorities are defined:
BK Background (least urgent)
BE Best effort
VI Video
VO Voice (most urgent)
Protocol Select the protocol from the drop-down list.
The default selection is Any.
Host  IP Range The rule will only apply to a flow of
messages that are from a computer with an IP address in
the range specified here.
Host  Port Range The rule will apply to a flow of
messages that fall within the values defined in the Host IP
1 Range field and also utilize a port defined in the Host 1
Port Range field.
Host  IP Range The rule will only apply to a flow of
messages that are from a computer with an IP address in
the range specified here.
Host  Port Range The rule will apply to a flow of
messages that fall within the values defined in the Host IP
2 Range field and also utilize a port defined in the Host 2
Port Range field.
•
•
•
•
WISH Rules
This section is where the defined WISH rules are displayed.
WISH rules can be enabled/disabled by toggling the check
box on the left of the rule. The icons next to the WISH rule
are described below:
Icon Functon Descrpton
Edit
Click this icon to modify an existing WISH
rule.
Delete
Click this icon to delete an existing WISH
rule.
Advanced > Wi-Fi Protected Setup
Advanced > Wi-Fi Protected Setup
PIN Settings
A PIN is a unique number that can be used to add the
Adapter to an existing network or create a new network.
For extra security, a new PIN can be generated. The default
PIN can be restored at any time.
Current PIN Shows the current pin setting.
Reset PIN to Default Resets the pin to the default value.
Generate New PIN Use this option to generate a new
pin.