Leviton Programmer/Remote - Manual (Page 18)

16
Selecting 1. Network from the ADVANCED screen
will bring you to the NETwORK screen.
x1
Back
ADVANCED
1. Network
2. Association
3. HAI Setup
4. RTS Devices
5. Utilities
Home
x1
Back
NETWORK
1. Include Node
2. Exclude Node
3. Ntwk Rediscovery
4. Update Devices
5. Remove Failed
Home
x1
Back
NETWORK
5. Remove Failed
6. Join Network
7. RZCPG Utils
8. Replace Node
9. Dev Properties
Home
1. Include Node
(refer to INSTALLATION CHECKLIST pg. 5)
2. Exclude Node
Use this option to remove a device from the
network (refer to the individual device
instruction sheet for details).
3. Network Rediscovery
This feature is used for updating your network,
specifically if nodes have moved or the network
environment has changed.
It will optimize the mesh
network to ensure overall
system routing integrity.
4. Update Controllers
(refer to INSTALLATION
CHECKLIST - Update
Controllers pg. 8).
5. Remove failed
Use this option to detect
devices that are non-
operational and require
removal from the network.
Once the list is generated, you
will press the center button
to select a device to
remove. Press the right soft
key (YES) to remove the
device from the network.
6. Join as Secondary
This feature allows you to
join this Leviton RZCPG
NETwORK
x1
Back Home
NTWK REDISCOVERY
Powerlevel -6DB
To change powerlevel
press [4 OFF]
Start? Press
x1
Cancel
FAILED NODE
Building Node List
Complete...65%
x1
Ba ck
REMOVE FAILED
Home
Bedroom
Bathroom
Hall
Room Controller