Replacing the card reader, Replacing, Card – Lenovo 7360 User Manual
Page 39: Reader, Installing, Adapter
2.
Rotate
the
adapter
card
retainer
1
to
the
open
position
to
remove
the
failing
adapter
card.
3.
Remove
the
failing
adapter
card
out
of
the
chassis.
4.
Remove
the
new
adapter
card
from
its
static-protective
package.
5.
Install
the
new
adapter
card
2
into
the
adapter
card
slot.
6.
Ensure
the
adapter
card
is
fully
seated
into
the
adapter
card
slot.
7.
Close
the
adapter
card
retainer.
8.
Go
to
Replacing
the
card
reader
Attention
Do
not
open
your
computer
or
attempt
any
repair
before
reading
the
“Important
safety
information”
in
the
ThinkCentre
Safety
and
Warranty
Guide
that
came
with
your
computer.
To
obtain
a
copy
of
the
ThinkCentre
Safety
and
Warranty
Guide,
go
to:
http://www.lenovo.com/support
This
section
provides
instructions
on
how
to
replace
the
card
reader.
1.
Open
the
computer
cover.
See
2.
Pivot
the
drive
bay
assembly
upward
to
gain
access
to
the
card
reader.
3.
Locate
the
card
reader.
4.
Disconnect
the
card
reader
cable
from
the
front
USB
connector
on
the
system
board.
See
Note:
Make
sure
you
note
the
location
of
the
cable
when
you
disconnect
the
cable
from
the
system
board.
Figure
28.
Installing
an
adapter
card
Chapter
3.
Installing
options
and
replacing
hardware
31