Lindy 25130 - Manual (Page 13)

User Manual English
11
Troubleshooting & FAQ
What’s the speed of a Powerline network over standard mains wiring?
HomePlug Powerline networks can operate at speeds of up to 85Mbps
How many HomePlug devices can I use on my network?
You can install up to 16 devices on your HomePlug Powerline network
What’s the maximum range of a Powerline network?
Approximately 300m through mains wiring
Can my neighbours receive my Powerline signals?
It is possible for your neighbours to receive your Powerline signals between two adjacent
homes. To prevent them accessing your network, please enable the 56-bit DES encryption on
your HomePlug device. To do this, you must run the Configuration Utility and set a new network
name to be used by each HomePlug device.
Are there any issues with power strips, UPS (Uninterruptible Power Supplies) and circuit
breakers?
Extensive testing has shown minimal problems affecting data transfer when these devices are
in use, but for the most reliable performance we recommend that each HomePlug unit is
plugged directly into a mains wall outlet.
Do I have to install the Powerline Configuration Utility on every computer on my
network?
No, the Powerline Configuration Utility does not need to be installed on any computer on your
network. However, to set up the security encryption and diagnose and configure the devices we
recommend you install it on at least one PC on your network.
Is HomePlug compatible with Macs?
Yes – the Ethernet Bridge can be used with any Mac with a 10/100 RJ-45 Ethernet connection,
without any special software installation! The only limitation is that setting or changing a
HomePlug device password requires connection to a PC running the Powerline configuration
software. If both Mac’s and PC’s are present on the network, then the passwords of all the
HomePlug devices can be changed remotely, from the PC!
Can I use HomePlug with my current Wireless or Ethernet network?
HomePlug was designed from the outset to provide maximum compatibility with existing
wireless and Ethernet networks. The PowerPacket technology adheres to standard Ethernet
protocols - using destination and source MAC addressing.