Linksys KX-TG5583 - Manual (Page 4)

4 For assistance, please visit http://www.panasonic.com/consumersupport
Battery performance
After your Panasonic battery is fully
charged, you can expect the following
performance:
*1 Handset is off the charger but not in
use.
Registration
Register the handset to a KX-TG5561/KX-
TG5566/KX-TG5571/KX-TG5576/KX-
TG5583 base unit.
Important:
L Charge the battery fully.
L Before registering, make sure the base
unit and the other handsets are not
being used.
L Have the handset and base unit near
each other when registering the
handset.
1
Base unit:
Press and hold
{INTERCOM} until the
CHARGE indicator flashes.
L After the CHARGE indicator starts
flashing, the rest of the procedure
must be completed within 1 minute.
2
Handset:
Press
{OK} (right soft key), then wait
until the handset beeps.
L Registration is complete.
L The handset’s extension number (!
to )) will be displayed.
Note:
L To cancel the handset registration,
please see your base unit’s operating
instructions.
Changing the display language
1
Press {MENU} (center of joystick), then
press
{#} {1} {1} {0}.
2
Press {1} to select English.
Press {2} to select Spanish.
3
Press {SAVE} or {GUARDAR}, then
press {OFF}.
Belt clip
You can hang the handset on your belt or
pocket using the included belt clip.
To attach the belt clip
To remove the belt clip
While pressing the top of the clip (
1), pull
the right edge in the direction of the arrow
(
2).
Operation Operating time
While in use
(talking) Up to 5 hours
While not in use
(standby)
*1
Up to 11 days
While using the
clarity booster
feature Up to 3 hours
1
2