Lenoxx Electronics CR-501 - Manual (Page 2)

IB-CR501-DG-E-052405
1
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings, install in accordance with
the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused
for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally or has been dropped.
14. This appliance shall not be exposed to dripping or splashing water
and that no object filled with liquid such as vases shall be placed
on the apparatus.
WARNING
The lightning flash with
arrowhead sym bol,
within an equilateral
triangle, is intended to
alert the user to the
presence of uninsulated
“dan gerous volta ge”
withi n the prod uct’s
enclosure that may be of
sufficient magnitude to
constitute a risk of electric
shock to persons.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT
FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE. TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG
TO WIDE SLOT, FULLY INSERT.
WARNING: TO REDUCE
THE RISK OF ELECTRIC
S HOCK,
DO NOT
REMOVE COVER (OR
BACK).
NO USER
SERVICEABLE PARTS
I NS I DE .
RE FE R
S ERV ICING TO
QUA LI FIE D S ERV ICE
PERSONNEL.
The exclamation point
within an equilateral
triangle is intended to
alert the user to the
presence of important
operating
and
maintenance (servicing)
inst ructio ns in the
literature accompanying
the appliance.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IB-CR501-DG-E-052405.pmd 5/24/2005, 4:34 PM 2