Lightolier Architectural Decorative 4SXT - Manual (Page 2)

4SXT
Decorative, Pendalux Suspension, 48", 96" Ext. Stem
Page 2 of 2
Philips Lightolier
e: [email protected]
t: (508) 679-8131
w: www.lightolier.com
4SXT May 24, 2011
Specifications are subject to change without notice.
© Koninklijke Philips Electronics N.V., 2011. All rights reserved.
Job Information Type:
2
7
6
3
4
5
1
Features
1. Extension Stem: ⅝" diameter steel tubing 48" long
(two provided with 4SXT96 Series extension kits.)
See page 1 for finishes.
2. Coupling: Threaded coupling provided with 4SXT96 series
extension kits to attach two 48" stems together.
3. Wiring Harness: Male connector with three 18AWG
conductors (120" long).
4. Hex Nut: Two provided for attachment to suspension plate.
5. Lock Washer: Two provided for attachment to suspension
plate.
6. Drill Locator: To assist in reinstalling ⅛" diameter hole in
stem when stem has been field cut.
7. Allen Wrench: 5 ⁄ 64 " Allen wrench provided to install swivel
ball (provided with standard suspension systems) to a field cut
stem.
Note: For all 4SB1XXX single stem kits, extension stem replaces
original stem. For all other kits, extension stem replaces short
section above collection point.