Loewe Network Mediaplayer Accessories TV - Manual (Page 7)

7 -
Initial installation
Select IP address assignment method
56 Select IP address and Subnet mask Assignment
method ,
adopt with OK.
Automatic (DHCP) : IP address and Subnet mask are
automatically issued by a DHCP server on your home
network.
➠ A DHCP server has to be set up on a device on the
network (e.g. WLAN router).
Input Static IP Address: IP address and Subnet mask are
entered manually.
Digit buttons: Input digits of IP address.
EPG button: Enter dots.
Function of coloured buttons:
Yellow: Delete last position.
Red: Delete address.
OK button: Adopt IP address.
➠ Proceed in the same way with the subsequent entry
of the Subnet mask.
Network Setting
Afterwards you will see a summary of the settings.
Press OK button to adopt settings.
backwards step by step for changes.
Select Server
In the last step you select the required media server on
your home network.
56 Select server.
Confirm with OK.
If your required media server should not be found the
first time, then you can press the red button to
Rescan
for media servers.
After successful initial installation, the media overview opens up
(
page 8 ) and the Connectivity display on the left of the TV set lights
up. The Connectivity display can, if required, be switched off via the
MediaNetwork menu (page 9).
Network Setting
Adopt
Adopt the following settings?
Network mode: Wireless
SSID : WLAN-Router_1
IP address : 192.168.1.123
Subnet mask : 255.255.255.0
OK
Select IP Address Assignment Method
Activate
Automatic (DHCP)
Input Static IP Address
OK
OK
Set Device IP Address
Adopt
IP Address 192.168.1.123_
OK
Input digits
Delete address
Delete last position
-
Input “.“
0 9
END
EPG
Select Server
Activate Rescan
Media-Server
OK
OK
english