Output to personal fm transmitter, Determine, With – LightSpeed Technologies 850IR User Manual
Page 32: Turn, Connect, Adjust
8 5 0 i R U s e r M a n u a l
850iR User Manual | 28
OUTPUT TO PERSONAL FM TRANSMITTER
SPEAKER OUTPUTS
250 400 700 1K 1K4 2K5 4K 6K
+10
0
-10
OFF
OFF
OFF
OFF
ON
ON
ON
ON
VOL.
ADJ.
ALD OUT AUX OUT
VOL.
ADJ.
COMPUTER
AUDIO INPUTS
TV/VCR
CD/DVD
800iX
INPUT
PAGING INPUT
ADJ
DC POWER CHARGERS
24VDC
L
L
R
R
SENSOR INPUTS
SENSOR
SHORT
1
2
3
4
SPEAKER OUTPUTS
250 400 700 1K 1K4 2K5 4K 6K
+10
0
-10
OFF
OFF
OFF
OFF
ON
ON
ON
ON
VOL.
ADJ.
ALD OUT AUX OUT
VOL.
ADJ.
COMPUTER
AUDIO INPUTS
TV/VCR
CD/DVD
800iX
INPUT
PAGING INPUT
ADJ
DC POWER CHARGERS
24VDC
L
L
R
R
SENSOR INPUTS
SENSOR
SHORT
1
2
3
4
2. Determine
the size and type of audio input
jack on the device as many manufacturers’
products differ in connector size and
shape. The Lightspeed LES-370 Personal
FM System requires a 3.5 mm to 3.5 mm
patch cable (part# CA-MMC3535, not included).
5. With
the 850iR and ALD turned on, speak into the
REDMIKE and slowly adjust the corresponding “ADJ”
volume control until the appropriate audio level is
attained in the ALD’s receiver headphones.
1. Turn
the ALD (Assistive Listening Device) volume control on the back panel all
the way down (fully counterclockwise).
3. Connect
a patch cable from the ALD’s microphone
jack or AUX input to the 3.5 mm audio jack labeled
“ALD OUT” on the back of the 850iR.
4. Adjust
the volume control on the ALD’s receiver
to maximum output. NOTE! This is to set the
maximum allowable signal from the 850iR.
SPEAKER OUTPUTS
250 400 700 1K 1K4 2K5 4K 6K
+10
0
-10
OFF
OFF
OFF
OFF
ON
ON
ON
ON
VOL.
ADJ.
ALD OUT AUX OUT
VOL.
ADJ.
COMPUTER
AUDIO INPUTS
TV/VCR
CD/DVD
800iX
INPUT
PAGING INPUT
ADJ
DC POWER CHARGERS
24VDC
L
L
R
R
SENSOR INPUTS
SENSOR
SHORT
1
2
3
4