Lathem 4000 - Manual (Page 8)

2000 – 4000 Series Time Recorder User’s Guide
Page 6
Setting Decimal Wheel with Tenths
Figure 4
Use only for recorders printing in tenths
(models with a 4 th digit of “2” or “5”)
1 Rotate Tenths Wheel (0.9)–
Figure 4, 4.1 until it is set at
“9” Rotate the Main Setting
- Figure 4, 4.3 until the
Tenths Wheel moves to a “0”.
(This is the zero minute.)
2. Set the Hour Wheel – Figure 4,
4.2 to the current Hour.
3. Rotate the Clock Face Setting
Wheel – Figure 5, 5.1 to set the
hands to match the time set on
the wheels.
4. Rotate the Main Setting Wheel – Figure 4, 4.3 to advance both
the Clock Face and Print Wheels together. Rotate until you
pass the actual time by one minute (each “click” indicates one
minute.)
For example, at 10:05, rotate 5 times = 5 clicks = 5 minutes
past ten o’clock.
5. Hold the corner of the Clock Face and release the Release
Latch by pushing it to the left. Slowly let the Type Section
down and press it firmly into the Type Section Headlock.
6. Make a sample registration and verify the time and date or day
is correct.
7. Replace and lock the case cover