Lexicon Recording Studio - Manual (Page 3)

Section Title
DECLARATION OF
CONFORMITY
manufacturer’s Name: Lexicon Professional
manufacturer’s Address: 8760 S. Sandy Pkwy.
Sandy, UT 84070, USA
Declares that the product:
Product name: Lexicon Alpha™
Note: Product name may be
suffixed by the letters-EU.
Product option: None
Conforms to the following Product Specifications:
Safety: IEC 60065 (2002)
EmC: EN 55013 (2001 + A1)
EN 55020 (1998)
Supplementary Information:
The product herewith complies with the requirements
of the Low voltage Directive 72/23/EEC and the
EmC Directive 89/336/EEC as amended by Directive
93/68/EEC.
vice-President
of Engineering - mI
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
Date: February 2, 2006
European Contact: Your local Lexicon
Professional Sales
and Service Office or
harman music Group
8760 S. Sandy Pkwy.
Sandy, UT 84070 USA
Ph: (801) 566-8800
Fax: (801) 568-7583
IMPORTANT SAFETY INSTRUCTIONS
ELECTROMAGNETIC
COMPATIBILITY
This unit conforms to the Product
Specifications noted on the
Declaration
of Conformity. Operation is subject
to the following two conditions:
•
this device may not cause harmful
interference, and
•
this device must accept any interference
received, including interference that may
cause undesired operation.
Operation of this unit within significant
electromagnetic fields should be avoided.
•
use only shielded interconnecting cables.
U.K. MAINS PLUG WARNING
A molded mains plug that has been cut off
from the cord is unsafe. Discard the mains
plug at a suitable disposal facility.
NEVER UNDER ANY
CIRCUMSTANCES SHOULD YOU
INSERT A DAMAGED OR CUT
MAINS PLUG INTO A 13 AMP
POWER SOCKET.
Do not use the mains plug without the fuse
cover in place. Replacement fuse covers
can be obtained from your local retailer.
Replacement fuses are 13 amps and mUST
be ASTA approved to BS1362.