Lucent Technologies Lucent Network Gateway - Manual (Page 2)

Technical Specifications (continued)
Description
4. Redundancy and Availability
• In-service upgrades and failovers
• All modules are hot swappable
5. Input/Output Support
• 28-port DS1, channelized: SF, ESF, B8ZS, AMI
• 28-port E1, channelized: CRC4, HDB3
• 3-port DS3/STS-1, channelized: VT1.5 or M13/C-Bit mapped, B3ZS
• 8-port DS3/STS-1, channelized: VT1.5 or M13/C-Bit mapped, B3ZS
• 3-port OC-3 channelized
• 3-port STM-1, STM-1J channelized*
• 4-port 1000 base-TX/SX/LX (GBIC modules)
• 5x 10/100Base-T interfaces for system management & signaling
6. Management Support
• TL1 command line interface
• SNMP V1/V2c traps
• SNMP MIBII, Chassis MIB, Alarm MIB
• Optional Element Management System that provides an easy to use GUI
7. Physical
• 24.5" H x 21.5" W x 18" D including cabling
• 180 lbs, fully loaded
• -40 to -56.7 Vdc, 1450 watts fully loaded
• NEBS and ETSI compliant for CO operating environment
• Redundant BITS timing support with internal Stratum 3 sources
• CE and UL certified
To learn more about our comprehensive
portfolio, please contact your Lucent
Technologies Sales Representative or:
Call 1 888 4 Lucent
Visit our web site at
www.lucent.com.
Accelerate is a trademark of Lucent
Technologies Inc.
*Future Release
This document is for planning purposes
only, and is not intended to modify or
supplement any Lucent Technologies
specifications or warranties relating to
these products or services. The publication
of this information in this document
does not imply freedom from patent or
other protective rights of Lucent
Technologies or others. Specifications are
subject to change without notice.
Copyright © 2005
Lucent Technologies Inc.
All rights reserved
Network Gateway v2 09/05
SM