Logan Graphic Products F200-2 - Manual (Page 2)

Assembly
1. Remove sanding wheel from base board using wrench supplied.
SAVE WRENCH & SCREW (Fig. 1).
2. Discard washers and nut.
3. Attach sanding wheel to top plate using screw and wrench from
step 1 (Fig. 2).
Identification
Instruction Manual Model F200-2
Precision SANDER ELITE
2
Fig. 1
Fig. 2
A. Wheel - 10 lb. wheel which rotates in either direction for sanding.
B. Handle - Handle to rotate wheel.
C. Alignment Bar - Fence stop that the frame lines up against for sanding.
D. Micro-stops - Alignment bar adjustments for perfect 45˚ angles.
E. Cleaning Bar - Used to loosen built-up saw dust on sanding wheel.
F. 45˚ Triangle - Used to adjust micro-stops to 45˚.
G. Wheel Wrench
H. Micro Stop Wrench
B
C
D
E
F
G H
A
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 847-526-5515 www.logangraphic.com