Lincoln Electric SF2400 STATIONARY FAN IM622 - Manual (Page 20)

A-13 INSTALLATION
SF2400 STATIONARY FAN
A-13
INSTALLING ThE OPTIONAL
LAMP KIT AND AUTOMATIC
START/STOP ARC SENSOR
(continued)
If installing with a 10 ft. or 13 ft. Arm:
Route the 36 ft. connecting cable through the four
cable holders in the arm (Fig. 26D). Leave plenty of
slack at each hinge (Fig. 26A) (22 in. at the middle
hinge).
Secure the cable in the cable holders (Fig. 26-Inset),
and use wire ties at the hinge as shown in Fig. 25.
Exit the arm through the cable hole in the rotating
hinge; use a knife to cut a small X-pattern in the grom-
met as shown in Figure 24.
4x D D A B A C A D D
4x
D D
A B A
C A
D
D
Fig. 26
L=min. 22" (550 mm) C
L=min. 22"
(550 mm)
C
Fig. 25