Lexmark Z2300 - Manual (Page 13)

Loading paper
Loading paper
1 Make sure:
• You use paper designed for inkjet printers.
• The paper is not used or damaged.
• If you are using specialty paper, you follow the instructions that came with it.
• You do not force paper into the printer.
2 Load the paper vertically against the right side of the paper support.
3 Adjust the paper guide until it rests against the left edge of the paper.
Note: To avoid paper jams, make sure the paper does not buckle when you adjust the paper guide.
Loading various paper types
Plain paper
Load up to 100 sheets of plain paper (depending on the thickness).
Make sure:
• The paper is designed for use with inkjet printers.
• The paper is loaded against the right side of the paper support.
• The paper guide rests against the left edge of the paper.
• The total thickness of paper does not exceed 10 mm (0.4 inches).
Glossy and photo paper
Load up to 25 sheets of glossy or photo paper.
Make sure:
• The glossy or printable side of the paper faces you. (If you are not sure which side is the printable side, see the
instructions that came with the paper.)
• The paper is loaded against the right side of the paper support.
• The paper guide rests against the left edge of the paper.
Note: Photos require more drying time. Remove each photo as it exits, and allow it to dry to avoid ink smudging.
13