Maintenance and service, English, Indoor unit outdoor unit – LG Floor Standing Type Air Conditioner User Manual

Page 25: How to clean plasma deodorant air cleaner

Advertising
background image

Owner's Manual 25

ENGLISH

Maintenance and Service

Maintenance and Service

Indoor Unit

Outdoor Unit

WARNING: Turn off the breaker and the unit before cleaning. To clean, wipe with a
soft, dry cloth. Do not use bleach or abrasives.

Supply power must be disconnected before cleaning the indoor unit.

NOTICE

Knob

Air Inlet

Air Cleaner

Fixing Tape

Knob

Hole

Electrode

Fixing Tape

Air Inlet

Air Inlet

How to Clean Plasma Deodorant Air Cleaner

At the smoking area, it is better to clean more than once in a month,
otherwise in the other places, once in every 3 months will be good.

- For safety, unplug prior to cleaning.

1. Pull out the knob of air inlet.

The antibiotic filter should be clean without disassembly as it is

united with air inlet.

2. Remove off green tape on the surface of plasma air cleaner

and then pull out the knob of cleaner.
The plasma air cleaner is located on the inner side of right air
cleaner.

3. Soak the plasma deodorant air cleaner in the mixed

detergent water for 1to 2 hours and clean it throughout.

For serious contamination, soak it for 3 to 4 hours.

4. Dry it in the shade throughout and insert its electrode into

the spring correctly. Close the inlet.

- When the inner side color of air cleaner changes into yellowish, dry it

under the sunlight.

- When you insert plasma deodorant air cleaner, be cautious not to

bounce the spring.

- After water cleaning, dry it throughout in a shade to prevent trouble.

The heat exchanger coils and panel vents of the
outdoor unit should be checked regularly.
If clogged with dirt or soot, the heat exchanger
and panel vents may be professionally steam
cleaned.

Dirty or clogged coils will reduce the
operating efficiency of the system and
cause higher operating costs.

NOTICE

Air Intake Vent

(Rear)

Air Outlet

Vent

Advertising