Cougar™ push pull gun - installation, Unpacking the push-pull gun – Lincoln Electric COUGAR K2704-3 User Manual
Page 9
Unpacking the Push-Pull Gun
Safety Precautions
– Read "Safety Precautions" in the Operating Manual before
proceeding. Only personnel that have read and understood
the Operating Manual should install and operate this equipment.
– Power source must be turned "OFF" and power leads disconnected
when installing this unit.
Unpacking the Push-Pull Gun
Carefully unpack your Cougar™ Push-Pull Gun and attach the
Barrel Assembly, and make sure you have all of the parts shown
below.
COUGAR™ Push Pull Gun - INSTALLATION
BARREL
ASSEMBLY
OPERATOR’S
MANUAL
3
COUGAR™ - PUSH-PULL GUN
KP2744-035A
Contact Tip .035 (0.9mm)
Included
KP2744-364A
Contact Tip . 3/64” (1.2mm)
Installed on Barrel Assembly
KP2746-1
Gas Diffuser
Installed on Barrel Assembly
KP742-1-62R
Gas Nozzle
Installed on Barrel Assembly
KP2773-2
Insulator
Installed on Barrel Assembly
KP2876-1
Drive Roll (.035 / 3/64th)
Installed
Service Wrench
Included