Recording menu, Initial installation – Loewe ViewVision DR+ User Manual

Page 25

Advertising
background image

5 -

Recording Menu

Rec Mode Set
You can set the picture quality for recording:

DVD+/-R/RW (4,7 GB) HQ mode:

approx. 1 hour.

SQ mode:

 hours.

LQ mode:

4 hours.

EQ mode:

6 hours.

HDD (160 GB) HQ mode:

approx. 43 hours.

SQ mode:

approx. 80 hours.

LQ mode:

approx. 15 hours.

EQ mode:

approx. 7 hours.

OK

OK

Rec Mode Set

Rec Aspect
DV Rec Audio
TV Rec Audio
Auto Chapter
AV2 Recording

EQ
LQ
SQ
HQ

3

Prev.

Select

Move

Call menu.

5

6 Select symbol Record.

4

Call second level.

5

6 Select Rec Mode Set.

4

Call third level.

56

Set desired recording quality (EQ, LQ, SQ or HQ).

Confirm with OK.

Rec Aspect
You can adapt the picture format (16:9 or 4:3) to the material being recorded
during the recording.

DV Rec Audio
You need to use this setting if your camcorder with
3 KHz / 1-bit is connected to the DV IN socket on the front panel.
Some digital camcorders have two stereo tracks for audio. One is used for record-
ing, the other is used for post-editing.
On the Audio 1 setting the original sound is recorded.
On the Audio 2 setting the edited sound is used.

OK

OK

Rec Mode Set
Rec Aspect

DV Rec Audio

TV Rec Audio
Auto Chapter
AV2 Recording

Audio 1
Audio 2

3

Prev.

Select

Move

TV Rec Audio
When recording bilingual TV you can select the audio channel to be recorded.

.

Audio 1+2: both languages are recorded.

Audio 1: language 1 only.

Audio 2: language  only.

Auto Chapter
Chapter start marks are inserted at fixed intervals in recordings on DVDs in video
mode. You can select intervals of 5, 10 or 15 minutes. If you select None automatic
chapter setting is switched off.

OK

OK

Rec Mode Set
Rec Aspect
DV Rec Audio
TV Rec Audio

Auto Chapter

AV2 Recording

None
5 Min
10 Min
15 Min

3

Prev.

Select

Move

AV2 Recording
The signal type can be selected to record the video in signal of a device connected
to the EURO AV2 DECODER.

Auto The video in signal is adapted automatically to the received

video signal.

CVBS Only for recording a CVBS input signal.

RGB Only for recording an RGB input signal.

Initial Installation

Advertising