Lucent Technologies Telephone Call Handling Back Panels: Front Panels 4406D+ - Manual (Page 8)

To program a button:
1 : Label a button as "Feature."
2 : Press .
3 : Lift the handset.
4 : Enter programming mode by pressing .
5 : Press the button you labeled.
6 : Press .
7 : Exit programming mode by pressing .
Using Features
To use a feature, do one of the following:
Press and then select the feature from the display
(not for the 4406D+ telephone).
Press
to move to the next screen of features.
Press to return to the previous screen of features.
Press and then dial the feature code.
Press the line button programmed with the feature.
Feature
Feature
EXT
EXT
Use a
Feature
Program
a Feature
Button
0 0 #
0 0 #
2 0
To program features, extensions, and phone numbers:
1 : Label the button.
2 : Press .
3 : Lift the handset.
4 : Press .
5 : Press the button you labeled.
6 : Dial the appropriate programming code (see the following
pages). Dial any additional numbers (such as extensions) if
needed.
7 : To program another button, repeat steps 1, 5, and 6; or exit by
pressing .
Program
a Feature
onto a
Button
0 0 #
0 0 #
Feature