La Crosse Technology WS-9049 - Manual (Page 12)

45
TO WALL MOUNT:
1.
Secure the bracket onto a desired wall using
the screws and plastic anchors.
2. Clip the remote temperature transmitter onto
the bracket.
Note: The mounting surface can affect the
transmission range. If, for instance, the unit is
attached to a piece of metal, it may then either
decrease or increase the transmitting range.
For this reason, we recommend not to place the unit on any metal
surfaces or in any position where a large metal or highly polished surface
is in the immediate vicinity (garage doors, double glazing, etc.). Before
securing in place, please ensure that the Temperature Station can
receive the 915MHz signal from the temperature transmitter at the
positions that you wish to place them.
46
CARE AND MAINTENANCE:
 Extreme temperatures, vibrations and shocks should be avoided as
these may cause damage to the unit and give inaccurate forecasts
and readings.
 When cleaning the display and casings, use a soft damp cloth only.
Do not use solvents or scouring agents as they may mark the LCD
and casings.
 Do not submerge the units in water. Furthermore, fix all parts in
place where the units are adequately protected against moisture
and rain.
 Immediately remove all low powered batteries to avoid leakage and
damage. Replace only with new batteries of the recommended
type.
 Do not make any repair attempts to the unit. Return them to their
original point of purchase for repair by a qualified engineer.
Opening and tampering with the unit may invalidate their
guarantee.
 Do not expose the units to extreme and sudden temperature
changes, this may lead to rapid changes in forecasts and readings
and thereby reduce their accuracy.
47
SPECIFICATIONS:
Indoor Temp : 14.2ºF to 139.8ºF with 0.2ºF resolution
-9.9ºC to +59.9ºC with 0.1°C resolution
(“OF.L” displayed if outside this range)
Outdoor Temp
: -39.8ºF to +139.8ºF with 0.2ºF resolution
-39.9ºC to +59.9ºC with 0.1°C resolution
(“OF.L” displayed if outside this range)
Indoor Humidity
: 1% to 99% with 1% resolution
(Displays “- -“ If temp is OL.F; display “- -“ if < 1% and “99%” if > 99%)
Outdoor Humidity
: 1% to 99% with 1% resolution
(Displays “- -“ if outside temp is OF.L; 1% if < 1% and 99% if > 99%)
Interior data checking intervals
Indoor Temperature
: Every 15 seconds
Humidity : Every 20 seconds
Air pressure checking interval : Every 15 seconds
48
Outdoor temperature and humidity data checking interval:
Every 4 seconds (or every 15 minutes if data are lost and displays “--.-“)
Transmission range
: up to 330 feet (open space)
Power consumption:
(alkaline batteries recommended)
Weather station : 2 x C, IEC LR14, 1.5V
Thermo-hygro transmitter : 2 x AA, IEC LR6, 1.5V
Battery life : up to 24 months
Dimensions (L x W x H):
Weather station: 7.20“ x 1.49“ x 7.36“ / 183 x 38 x 187 mm
External transmitter: 1.50” x 0.83” x 5.05” /38.2mm x 21.2mm x 128.3mm
WARRANTY
La Crosse Technology, Ltd provides a 1-year limited warranty on this
product against manufacturing defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only
on products purchased and used in North America and only to the original
purchaser of this product. To receive warranty service, the purchaser