Lexmark Z65 - Manual (Page 2)

Edition: December 2001
The following paragraph does not apply
to any country where such provisions
are inconsistent with local law:
LEXMARK INTERNATIONAL, INC.,
PROVIDES THIS PUBLICATION “AS IS”
WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. Some states do
not allow disclaimer of express or implied
warranties in certain transactions;
therefore, this statement may not apply to
you.
This publication could include technical
inaccuracies or typographical errors.
Changes are periodically made to the
information herein; these changes will be
incorporated in later editions.
Improvements or changes in the products
or the programs described may be made at
any time.
Comments about this publication may be
addressed to Lexmark International, Inc.,
Department F95/032-2, 740 West New
Circle Road, Lexington, Kentucky 40550,
U.S.A. In the United Kingdom and Eire,
send to Lexmark International Ltd.,
Marketing and Services Department,
Westhorpe House, Westhorpe, Marlow
Bucks SL7 3RQ. Lexmark may use or
distribute any of the information you supply
in any way it believes appropriate without
incurring any obligation to you. You can
purchase additional copies of publications
related to this product by calling 1-800-553-
9727. In the United Kingdom and Eire, call
0628-481500. In other countries, contact
your point of purchase.
References in this publication to products,
programs, or services do not imply that the
manufacturer intends to make these
available in all countries in which it
operates. Any reference to a product,
program, or service is not intended to state
or imply that only that product, program, or
service may be used. Any functionally
equivalent product, program, or service that
does not infringe any existing intellectual
property right may be used instead.
Evaluation and verification of operation in
conjunction with other products, programs,
or services, except those expressly
designated by the manufacturer, are the
user’s responsibility.
Lexmark and Lexmark with diamond design
are trademarks of Lexmark International,
Inc., registered in the United States and/or
other countries.
Color Jetprinter is a trademark of Lexmark
International, Inc.
Other trademarks are the property of their
respective owners.
© Copyright 2001 Lexmark International,
Inc. All rights reserved.
UNITED STATES GOVERNMENT
RESTRICTED RIGHTS
This software and documentation are
provided with RESTRICTED RIGHTS. Use,
duplication or disclosure by the
Government is subject to restrictions as set
forth in subparagraph (c)(1)(ii) of the Rights
in Technical Data and Computer Software
clause at DFARS 252.227-7013 and in
applicable FAR provisions: Lexmark
International, Inc., Lexington, KY 40550.
Federal Communications Commission
(FCC) compliance information statement
The Lexmark Z65 Color Jetprinter,
Type 4107-001, has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not
cause harmful interference, and (2) this
device must accept any interference
received, including interference that may
cause undesired operation.
The FCC Class B limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in
a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be
determined by unplugging the equipment
and then plugging it back in, the user is
encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
• Consult your point of purchase or
service representative for additional
suggestions.
The manufacturer is not responsible for any
radio or television interference caused by
using other than recommended cables or
by unauthorized changes or modifications
to this equipment. Unauthorized changes or
modifications could void the user’s authority
to operate this equipment.
Note: To assure compliance with FCC
regulations for a Class B computing device,
use a properly shielded and grounded
cable such as Lexmark part number
12A2405 for USB attach. Use of a
substitute cable not properly shielded and
grounded may result in a violation of FCC
regulations.
Any questions regarding this compliance
information statement should be directed to
Director of Lab Operations, Lexmark
International, Inc., 740 New Circle Road
NW, Lexington, KY 40550, (859) 232-3000.
ENERGY STAR
The EPA ENERGY STAR office equipment
program is a partnership effort with
computer manufacturers to promote the
introduction of energy-efficient products
and to reduce air pollution caused by power
generation.
Companies participating in this program
introduce personal computers, printers,
monitors, or fax machines that power down
when they are not being used. This feature
will cut the energy used by up to 50
percent. Lexmark is proud to be a
participant in this program.
As an ENERGY STAR Partner, Lexmark
International, Inc. has determined that this
product meets the ENERGY STAR
guidelines for energy efficiency.
Industry Canada compliance statement
This Class B digital apparatus meets all
requirements of the Canadian Interference-
Causing Equipment Regulations.
Avis de conformité aux normes
d’Industrie Canada
Cet appareil numérique de la classe B
respecte toutes les exigences du
Règlement sur le matériel brouilleur du
Canada.
European Community (EC) directives
conformity
This product is in conformity with the
protection requirements of EC Council
directives 89/336/EEC and 73/23/EEC on
the approximation and harmonization of the
laws of the Member States relating to
electromagnetic compatibility and safety of
electrical equipment designed for use
within certain voltage limits.
A declaration of conformity with the
requirements of the Directive has been
signed by the Director of Manufacturing and
Technical Support, Lexmark International,
S.A., Boigny, France.
This product satisfies the Class B limits of
EN 55022 and safety requirements of EN
60950.
The United Kingdom
Telecommunications Act 1984
This apparatus is approved under the
approval number NS/G/1234/J/100003 for
the indirect connections to the public
telecommunications systems in the United
Kingdom.
Safety information
• Use only the Lexmark power supply
provided with this product or an
authorized Lexmark replacement
power supply.
• Connect the power cord to an electrical
outlet that is near the product and
easily accessible.
• Refer service or repairs, other than
those described in the manual, to a
professional service person.