Linksys WVC54G-UK - Manual (Page 54)

46 Chapter 8: Setting up the Linksys SoloLink™ DDNS Service
Setup Wizard for the SoloLink DDNS Service
Wireless-G Internet Video Camera
18. A pop-up screen will inform you that you have successfully set up the SoloLink DDNS Service for the Camera.
Click OK.
19. Set up port forwarding on your network router, so the SoloLink DDNS Service will be able to track the
Wireless-G Internet Video Camera. Go to www.linksys.com/portfwd for instructions on how to configure a
Linksys router.
For other routers, refer to your router’s documentation.
The SoloLink DDNS setup is complete. If you want to register more Cameras with your SoloLink account,
proceed to the “SoloLink Registration of Additional Cameras” section.
For more information about the Camera’s Web-based Utility, proceed to “Chapter 9: Using the
Wireless-G Internet Video Camera Web-based Utility.”
Figure 8-19: Successful Setup Screen
NOTE: Make sure you set up the port forwarding feature on your network router, so the SoloLink
DDNS Service will be able to access the Camera.
Figure 8-20: Port Forwarding Information